Hints & Advice
We strongly recommend the brass towel warmer is either used/controlled with a timer to save energy. Ensure that all electrical connections are made in accordance with National Electric/Local Codes, using at least 14 ATI’s copper wire protected by a dedicated 15 amp Ground Fault Circuit Interuptor (GFCI) /2.5 amp fuse. It is imperative that all the components used comply with National Electric/Local Codes.
Vogue brass towel warmers are designed for either:-
- Independently using the standard ON/OFF switch
- In conjunction with a time switch
- In conjunction with a separate room thermostat (Please consult your electrician)
Once all wall/floor mounting screws have been tightened, the unit is now ready to be energised. Turn on the electric supply at the main panel and activate the brass towel warmer.
AFTERCARE
From time to time it is advisable to wash your brass towel warmer to maintain its pristine finish. Please only use a cloth dampened in warm soapy water to do this.
NEVER USE ANY FORM OF ABRASIVE PAD OR CHEMICAL CLEANER WHICH COULD PERMANENTLY DAMAGE THE FINISH.
A warning label is attached to the product as a reminder. If cleaning is carried out by others (or by staff) please hang this label prominently on the product so that they are advised of its proper cleaning. Failure to observe these cleaning instructions can invalidate the product guarantee.